Alto-Shaam QC-40 Operations Instructions download pdf (Page 7)

#8402 QC-40 INSTALLATION & MAINTENANCE MANUAL PG. 5

2.1 START-UP PROCEDURES

2.1.1 Place the branch circuit breaker (main

panel) in the ON position. Then place the

Quickchiller circuit breaker in the ON

position.

2.1.2 The Main Menu screen must appear on

the Control display (see figure 2.1.3). If

the Main Menu screen appears, skip

Sections 2.1.3 thru 2.1.5 and proceed with

SET-UP per Section 2.2. If the Main Menu

screen does not appear, proceed with

Section 2.1.3.

2.1.3 The control display will show "SYSTEM

INITIALIZED" and an audible alarm will

sound for 30 to 60 seconds. Leave the

unit alone for two (2) minutes.

2.1.4 Turn the Quickchiller circuit breaker OFF.

Leave the unit OFF for 30 seconds.

2.1.5 Turn the Quickchiller circuit breaker ON

again. The Main Menu screen on the

display should now appear.

2.2 SET-UP

2.2.1 Make certain the main menu appears on

the control display (LCD) when power is

supplied to the unit.

2.2.2 Access the Password screen: Press and

hold the "0" button on the keyboard for a

period of 5 seconds. When the Password

Entry screen is in view, enter the password

number on the numerical keyboard.

PASSWORD

5588744

Following password entry, press "D" on

the keyboard to access the User Setting

Menu screen. If the wrong password

number is entered in error, "Access

Denied" will appear in the display. If it

remains in the display longer than 60

seconds, the locked control panel cover

must be opened and the yellow reset

button pressed ONCE. Relock the control

panel and enter the correct password to

gain access to the User Setting Menu

screen.

2.2.3 Select option "B" and set the

correct time and date.

Following entry, press "C," immediately

followed by "D" to return to the Main

Menu screen. (

FOR ADDITIONAL

INFORMATION SEE BOOKLET NO

. 265,

Quickchiller Operating Procedure Guide,

SECTION 7.0 USER SET-UP.)

2.2.4 Press and hold the "1" button on the

keyboard for a period of five (5) seconds.

The Software Version screen will appear.

Quickchiller Model QC-40 must appear. If

Model QC-40 appears, proceed with

Section 2.3. If Model QC-40 does not

appear, proceed with Sections 2.2.5

through 2.2.7.

2.2.5 Press and hold zero (0) button again

until Password Entry screen appears.

Enter password number on the

numerical keyboard.

Press "D" Button to access Set-up Menu

Screeen.

2.2.6 Select option "C" and set correct Chiller

Model to "QC-40" using the "C" button.

Following entry, press "D", and press "D"

again to return to Main Menu screen.

2.2.7 The QC-40 is now ready for operation.

2.0 — Control Set-Up and Operation

FOR A COMPLETE AND COMPREHENSIVE GUIDE

TO THE OPERATION OF THE QUICKCHILLER SEE

BOOKLET NO. 265,

QuickchillerOperating Procedure Guide

Password

5588744

NOTE: BACK-UP BATTERY POWER

The Quickchiller control back-up battery is

fully charged prior to Quickchiller shipment

and will maintain control memory for

approximately fourteen (14) days.

NOTE: TWENTY

-FOUR (24) HOUR TIME OR

MILITARY TIME IS REQUIRED

.

1:00 PM = 1300 M

ILITARY TIME

Password

16021892

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Comments to this Manuals

No comments