Alto-Shaam QC-50 Operations Instructions download pdf (Page 8)

2.1 START-UP PROCEDURES

2.1.1 Place the branch circuit breaker (main

panel) in the ON position. Then place the

Quickchiller circuit breaker in the ON

position.

2.1.2 The Main Menu screen must appear on the

Control display (see figure 2.1.3). If the

Main Menu screen appears, skip Sections

2.1.3 thru 2.1.5 and proceed with SET-UP

per Section 2.2. If the Main Menu screen

does not appear, proceed with Section

2.1.3.

2.1.3 The control display will show "SYSTEM

INITIALIZED" and an audible alarm will

sound for 30 to 60 seconds. Leave the unit

alone for two (2) minutes.

2.1.4 Turn the Quickchiller circuit breaker OFF.

Leave the unit OFF for 30 seconds.

2.1.5 Turn the Quickchiller circuit breaker ON

again. The Main Menu screen on the

display should now appear.

2.2 SET-UP

2.2.1 Make certain the main menu appears on

the control display (LCD) when power is

supplied to the unit.

2.2.2 Access the Password screen: Press and

hold the "0" button on the keyboard for a

period of 5 seconds. When the Password

Entry screen is in view, enter the password

number on the numerical keyboard.

PASSWORD

5588744

Following password entry, press "D" on

the keyboard to access the User Setting

Menu screen. If the wrong password

number is entered in error, "Access

Denied" will appear in the display. If it

remains in the display longer than 60

seconds, the locked control panel cover

must be opened and the yellow reset

button pressed ONCE. Relock the control

panel and enter the correct password to

gain access to the User Setting Menu

screen.

2.2.3 Select option "B" and set the correct time

and date.

Following entry, press "C," immediately

followed by "D" to return to the Main

Menu screen. (FOR ADDITIONAL

INFORMATION SEE BOOKLET NO

. 265,

Quickchiller Operating Procedure Guide,

SECTION 7.0 USER SET-UP.)

2.2.4 Press and hold the "1" button on the

keyboard for a period of five (5) seconds.

The Software Version screen will appear.

Quickchiller Model QC-50 must appear. If

Model QC-50 appears, proceed with Section

2.3. If Model QC-50 does not appear,

proceed with Sections 2.2.5 through 2.2.7.

2.2.5 Press and hold zero (0) button again until

Password Entry screen appears. Enter

password number on the numerical

keyboard.

Press "D" button to access Set-up

Menu Screen.

2.2.6 Select option "C" and set correct Chiller

Model to "QC-50" using the "C" button.

Following entry, press "D", and press "D"

again to return to Main Menu screen.

2.2.7 The QC-50 is now ready for operation.

#8400 Installation & Maintenance Manual - Pg. 6

2.0 — Control Set-Up and Operation

FOR A COMPLETE AND

COMPREHENSIVE GUIDE TO

THE OPERATION OF THE

QUICKCHILLER SEE

BOOKLET NO. 265,

Quickchiller

TM

Operating Procedure Guide

Password

5588744

NOTE: BACK-UP BATTERY POWER

The Quickchiller control back-up battery is

fully charged prior to Quickchiller shipment

and will maintain control memory for

approximately fourteen (14) days.

NOTE: TWENTY-FOUR (24) HOUR TIME OR

MILITARY TIME IS REQUIRED.

1:00 PM = 1300 MILITARY TIME

Password

16021892

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Comments to this Manuals

No comments