Alto-Shaam QC-40 User Manual download pdf (Page 3)

QUICKCHILLER SET-UP

Since all Quickchillers use the same microprocessor, they

must be configured for each specific model. The set-up is

completed at the factory, however, if the unit is unplugged for

more than 14 days, the microprocessor will lose the factory set

memory and revert back to a default setup. The default is

always specific to the model QC 50.

The Main Menu screen must appear on the control

display. To access the Password screen, press and hold the

“0” key on the key board for 5 seconds. When the Password

screen is in view, enter the password 5588744 using the

control keyboard (Figure 3).

After entering the password on the Password screen, press

the “D” key on the keyboard to access the User Setting screen.

Press and hold the "1" button on the keyboard for a period of five (5)

seconds. The Software Version screen will appear. The Quickchiller

model number must appear.

Press and hold the "1" button on the keyboard for a period of five (5) seconds. The Software Version screen will

appear. The Quickchiller model number must appear.

If the model number does not appear, press and hold zero (0) button again until Password Entry screen appears.

Enter password 16021892 and press "D" button to access Set-up Menu Screen. Select option "C" and set correct chiller

model number using the "C" button. Following entry, press "D", and press "D" again to return to Main Menu screen.

NOTE: If the wrong password number is entered in error, “ACCESS DENIED” (Figure 4) will appear in the

display, an alarm will sound for 10 seconds, and the Main Menu screen will reappear. If this

situation occurs, press and hold the “0” key for 5 seconds and reenter the correct password.

SETTING TIME, DATE & OPTIONS

When the User Setting screen (Figure 5) appears on the

control display, push the “B” key on the keyboard to access

the time and date screen (Figure 6). The time and date are

very important particularly if a printer is used since

incorrect time and date settings will impact the printout.

NOTE: TIME MUST BE ENTERED AS 24 HOUR,

MILITARY TIME (HH:MM:SS).

After the time and date have been set, press the “C” key

to return to the User Setting screen. After the User Setting

screen appears, press the “C” (Miscellaneous) key to change

the following options. Press “A” to scroll to the next screen.

TEMPERATURE UNITS: Allows the user to choose

between Celsius and Fahrenheit.

KEYBOARD BUZZER: Allows the user to turn tone sound ON or OFF.

AUTOMATIC DEFROST: Allows the user to turn the Auto-Defrost ON or OFF.

DEFROST TIME: Allows the user to set the maximum minutes for the defrost cycle.

NOTE: DEFAULT IS SET FOR 20 MINUTES

AFTER ALL OPTIONS HAVE BEEN SELECTED, PRESS “D” TO EXIT AND RETURN TO THE USER SETTING SCREEN.

SETTING SET POINTS

From the user screen, press the”A” (Set Point) key to access the Numeric Setting screen (Figure 7). All

set points are shown in Celsius and can only be changed within an allowable range. Any value entered

outside of this range will result in a warning buzzer and the value must be reentered. To reset any set point

to the factory default, push the “CE” key to show the default values for each set point and then key in the

Q-CHILLER CONFIGURE

PASSWORD: 5588744

Figure 3

PASSWORD ENTRY SCREEN

Figure 4

PASSWORD DENIED SCREEN

Figure 5

USER SETTING MENU SCREEN

Figure 6

TIME AND DATE SCREEN

ACCESS DENIED

Set Points . . . . . . . . . . . . A

Time and Date . . . . . . . . . B

Miscellaneous . . . . . . . . . C

Exit . . . . . . . . . . . . . . . . D

Enter Time and Date

01/17/01 08:33:48

A=Left C=Accept

B=Right D=Cancel

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Alto-Shaam QC-40 User Manual Page 3

Comments to this Manuals

Related products and manuals for Small kitchen appliances Alto-Shaam QC-40